Mixed Lot

Parts, Literature & Hardware Mixed Lot

Books, Tooling & Uncategorised Stock

385 product lines · 2,496 units in stock

Retail valuation

€33,723

Independent retail estimate. Make a reasonable offer; all stock must go.

Make an offer on this lot ↓ Download parts list (PDF)

Why this lot

Hardware, technical literature, tooling and uncategorised stock - the 'everything-else' job lot to round out a whole-shop deal.

Spotlight products

Engine Cowling Set, Top and Bottom, ATEC Zephyr 2000

Brand-new top and bottom engine cowling set for the ATEC 122 Zephyr 2000 ultralight, covering aircraft built across a decade of production.

Fits ATEC 122 Zephyr 2000 range, produced approximately 1995 to 2005
Complete set: one top cowling and one bottom cowling, brand new, unused
New-old-stock; no longer in production through normal supply channels
A significant number of Zephyrs remain airworthy worldwide; demand exists
Buying a spare cowling set now is the only reliable way to secure one

New Old Stock 2-Blade Fixed Propeller, Samba Ultralight

Brand-new unused 2-blade fixed propeller for the Samba ultralight aircraft, cleared from old stock.

Fits Samba Czech ultralight and microlight aircraft
2-blade fixed configuration; brand new, never fitted
Old stock clearance; this part is no longer sourced through normal trade channels
Secondary market visibility for Samba propellers is extremely limited
Buyers should verify pitch and diameter against their aircraft type certificate

Complete OE Engine, Massey Ferguson 35 and 135 Series

Complete OE engine for the Massey Ferguson 135, 35, and related series, supplied without generator or starter.

Fits Massey Ferguson 135, MF 35, and related series tractors
Complete engine, OE specification
Supplied without generator or starter motor; buyer to transfer or source separately
Price is quoted plus VAT; confirm total before purchase
Suitable for rebuild or direct replacement in compatible MF series frames

3-Cylinder Piston, Cylinder, Gasket and Bearing Kit

Full engine rebuild set for a 3-cylinder unit, comprising pistons, cylinders, gaskets and bearings.

3-cylinder engine application, confirm fitment
Includes pistons, cylinders, gaskets and bearings
Suitable for full bottom-end rebuild
Verify bore size and application before purchase

Wing Tip Extensions, Urban Air Samba Aircraft

Wing tip extension pair for the Urban Air Samba light aircraft, structural airframe components.

Fits Urban Air Samba aircraft
Wing tip extension components
Specialist airframe parts, verify aircraft serial before purchase
Sold as a pair

Complete Bonnet Tinware Kit, Massey Ferguson 165

Complete bonnet tinware kit for the Fiat 165, supplied as a full set without hardware.

Fits Fiat 165
Complete tinware set
Hardware not included, see item 86937 for hardware variant
Suited to full restoration

Fiat 165 Bonnet Complete Kit with All Hardware

Complete bonnet kit for the Fiat 165, including all mounting and fitting hardware.

Fits Fiat 165
Complete kit with all hardware included
See item 86996 for tinware-only variant
Suited to full restoration

Radiator, Australian Specification

Radiator built to Australian specification, confirm exact fitment and dimensions before purchase.

Australian-spec unit
Confirm application, vehicle and dimensions before ordering
Sold as single unit

Every part in this lot

↓ Download full parts list (PDF)

All 385 product lines, grouped by sub-category. Expand a group to see the parts, or download the full illustrated catalogue as a PDF.

Other Parts247 lines

Complete OE Engine, Massey Ferguson 35 and 135 Series×1
3-cylinder Porsche-Diesel tractor engine complete rebuild kit.×1
3-Cylinder Piston, Cylinder, Gasket and Bearing Kit×1
3-cylinder engine rebuild kit with pistons, cylinder, gaskets.×1
Wing Tip Extensions, Urban Air Samba Aircraft×1
3-cylinder engine rebuild kit with pistons, cylinder, gaskets.×1
Complete Bonnet Tinware Kit, Massey Ferguson 165×1
Fiat 165 Bonnet Complete Kit with All Hardware×1
Radiator, Australian Specification×1
Wiseco race piston set 94mm for high-performance Type 1 engines.×1
Complete piston set for air-cooled tractor or small engine rebuild.×1
Pre-chamber for IHC McCormick D215 tractor engine.×1
Pre-chamber for IHC McCormick DLD2 tractor engine.×1
Complete piston set for classic air-cooled tractor engines.×1
Engine Cowling Set, Top and Bottom, ATEC Zephyr 2000×1
IHC McCormick tractor parts and components.×1
Piston and cylinder set for D436, D439, DD418 McCormick engines.×1
Front grille, styling and air-intake component×1
Deutz FL514 piston and cylinder set, complete — air-cooled engine rebuild kit.×1
Gasket sets for classic tractor engines, multiple fitments available.×1
New Old Stock 2-Blade Fixed Propeller, Samba Ultralight×1
Cylinder head for Massey Ferguson 135 restoration.×1
Radiator for Massey Ferguson 135 and 148 tractors.×1
Exhaust box/muffler, stainless construction available×1
Perkins 3.152 crankshaft with lip seal and counterweight.×10
Front wheel with tyre 16×750 complete assembly for Porsche-Diesel 165.×2
Rare Split Bus Samba instrument panel blank.×1
Alternator, higher specification, Porsche Diesel tractor×1
100mm piston and cylinder set for single-cylinder tractor engine.×1
Exhaust pipe assembly, larger capacity or heat-exchanger spec×1
Alternator, mid-range specification, Porsche Diesel tractor×1
Alternator, Porsche Diesel tractor, rebuilt or exchange×1
Bayonet oil filler cap with vent for classic tractor engine.×1
Sealed-beam headlight assembly, larger format, generic fitment×1
Grill kit for Porsche Diesel tractor — body trim highly desirable to restorers.×1
Exhaust downpipe or connector, moderate-demand replacement×1
Complete grill kit for Porsche-Diesel 135 oldtimer tractor body.×1
Front axle parts for classic tractor models, specific fitment varies.×1
Rotary starter and heater switch, complex control×1
Water pump for D-series IHC and Porsche-Diesel tractor engines.×1
Steering wheel OE-spec, Porsche-Diesel original style×1
Air filter for Ferguson FE35, popular classic farm tractor.×1
Pittman drop arm for Porsche-Diesel steering box, model-specific×1
Starter ring gear for air-cooled tractor flywheel.×1
Tractor round headlamp 130mm, sealed-beam light fixture.×1
Porsche Diesel tractor regulator 11A, specialized electrical component.×1
Brake band for VW Autostick semi-automatic, collector-demand part×1
Rear brake drum, standard replacement for MF tractor series.×2
Whelen aviation flash tube reflector lamp assembly.×3
Temperature gauge, air-cooled engine VW/Porsche Diesel×1
Tractormeter, combined tachometer and hour-meter gauge×1
Brake lining/shoe set, high-performance or branded spec×1
Complete top gasket set for DLD2, D212–D215 tractor engines.×1
Glow plug for DLD tractor engines, multiple specifications.×1
Ignition and lighting switch with key, Porsche tractors×1
Handbrake operating rod with clevis, machined assembly×1
Headlamp and light switch, vintage tractor, limited supply×1
Brake light switch, Porsche Diesel tractor, original style×1
Turn signal switch, vintage tractor, new old stock×1
Aircraft wing tip strobe unit for aviation navigation and safety lighting.×1
Tractor headlight with 24mm mounting bracket, quality replacement.×1
1.00mm cylinder head gasket set for T80, T84, T86 models.×1
Full block gasket set for Porsche-Diesel T80 and T84 models.×1
Main bearing set for D-series tractor engine rebuild.×1
Inlet valve for Porsche-Diesel D436, D439, D440 engines.×1
Handbrake ratchet, second Porsche-Diesel variant×1
Brake lining shoes, tractor-specification commodity×1
Exhaust valve for Porsche-Diesel D436, D439, D440 engines.×1
12-volt glow plug for DLD tractor engines.×2
Handbrake ratchet for Porsche-Diesel tractor, niche fitment×1
Thrust bearing set for D-series tractor engine.×1
Seat bracket complete for Porsche-Diesel 165 oldtimer restoration.×1
Steering wheel, aftermarket generic design×1
Brake lining shoes, standard replacement set×1
Brake lining shoes, market-standard pricing×1
Seat pan, pressed steel replacement for generic tractor seating.×1
Glow plug OE-quality, Beru or equivalent for diesel engine×1
Connecting rod bolt for Perkins 250, 275 tractor engines.×2
Piston and pin for Perkins A3.152 or AD3.152 engine rebuild.×10
Radiator cowl for MF 135–165 tractor series, guides airflow.×1
Pressed-steel headlamp mounting bracket, model-specific fitment×1
Mounting bracket, generic fabricated component×1
Brake shoes exchange, relined cores with value retention×1
Pull-type starter and heater switch, simplified design×1
Cylinder head gasket for DLD2, D212–D215 tractor engines.×1
Connecting rod bearing set for D-series tractor engine.×1
Diesel fuel filler lid and cap for Porsche-Diesel 165 tractor.×1
Fuel tank cap, locking or sealing spec for vintage tractor×1
AT-backe, scarce automatic-transmission brake shoe×1
MF clutch disc, 250×150mm diameter, 25mm bore, 41.5mm hub.×5
Right-angle drive unit, PTO or speedometer take-off×1
Inlet valve AUS OE spec; forged steel engine valve.×1
Exhaust valve, OE AUS spec for air-cooled engine rebuild×1
Fuel filter, commodity replacement for tractor engines×1
Thermostat, air-cooled engine climate control×1
Diesel fuel cap — tank closure component for tractor fuel.×1
Cylinder head stud for D-series tractor engine assembly.×20
Seat cushion set for Porsche-Diesel 165 tractor, restored comfort.×1
Injector nozzle, mid-range spec for diesel engine×1
Injector nozzle variant, mid-range diesel application×1
Jockey wheel; generic trailer or workshop accessory.×1
Sway bar clamp and bracket kit for T1 standard anti-roll bar.×2
Brake shoes exchange, smaller application or lower-spec×1
Exhaust valve for DLD-series tractor engine.×1
Gear shift lever for 35 and 35X vehicles.×1
Axle journal bush, bronze or poly consumable×1
Remote thermometer sender, low-value NTC/bi-metal unit×1
Steering wheel cosmetic trim kit with center button — cabin restoration component.×1
Clutch disc for Massey Ferguson 280 tractor.×10
Rubber mounting insert, vibration damping×1
Deutz FL712/FL812 inlet valve (42014) — engine intake component.×1
Grill panel pair LH and RH for Porsche-Diesel tractor restoration.×2
Console or fuse block alternative, electrical ancillary component×1
Bonnet gas spring pair black; commodity item widely sold item.×4
T25 roof gutter repair section 1250mm, mild steel panel.×1
Guide bearing bush variant for classic tractor engine.×1
Inlet valve for DLD-series tractor engine.×1
Grille panel left and right pair body panel.×1
Diesel fuel filter cartridge; consumable replacement for efficient engine operation.×1
Injector nozzle, agricultural diesel commodity part×1
Handbrake detent pawl weld-on variant, small stampings×1
Handbrake ratchet, economical entry-level variant×1
Handbrake detent pawl weld-on, budget-friendly option×1
Oil filler sealing ring for tractor engine.×1
Oil filler cap seal for classic tractor engine.×1
Connecting rod for Perkins A3.152 and MF245 engines.×12
Spiral spring, heavier or longer tension spec×1
Inlet valve for Case IH BD-144, 250, 275 diesel engines.×1
Valve guide for classic tractor engine cylinder head.×4
Handbrake detent pawl weld-on, tractor brake hardware×1
Deutz FL812/FL912 exhaust valve (42018) — engine output component.×1
Cable entry, bare commodity low-value item×1
Spiral spring, small gauge commodity hardware×1
Spiral spring, low-value standard commodity×1
Guide bearing bush for classic tractor engine.×1
Console block electrical assembly component×1
Rear indicator light, left-hand side×1
Oil filler cap assembly, sealing complete×1
Front indicator and marker light, right-hand side×1
LED side marker lamp in red or white, modern lighting upgrade.×2
Fuel filter glass assembly, complete unit×1
Jockey wheel mounting bracket; support hardware.×1
Decal kit for Porsche-Diesel 165, complete graphics set.×1
Working lamp assembly, complete and ready to install×1
Hella 12V horn for classic VW and tractor applications.×2
Spiral spring, widely-available standard hardware×1
Nine inch UNF zinc plated bolt specialty fastener.×4
Red lamp with plate lamp, replacement assembly×1
Installation kit, hardware and fastener bundle×1
Cooling hose, elbow, or radiator hose for classic tractors.×1
Flywheel locking plate for tractor engine timing and service.×4
Pre-chamber top and bottom seal pair for diesel engine.×4
Grille panel 61681 new old stock trim part.×1
Bonnet stud for various models classic VW hardware.×10
Badge 135 with sticker set OEM reproduction.×2
Radiator cap for D214/D217 classic tractor engines.×1
Red lamp without plate lamp, replacement assembly×1
Round turn signal lamp, replacement unit×1
O-ring piston cylinder seal for engine rebuild kit.×1
Electrical regulator, charging system component×1
Side panel LH — body panel for left side of tractor.×1
Decal set for Porsche-Diesel 1155/135 tractor restoration.×1
Connecting rod bush for classic tractor engine rebuild.×10
Valve guide, precision-fit replacement component×1
Sized O-ring set for T80, T84, T180, T182, T185 engines.×1
Dipetane fuel treatment, 1-liter bottle; combustion cleaner, brand-name additive.×6
Whelen aviation wing tip green lens.×1
Cylinder sealing ring O-ring for engine rebuild.×1
Jockey wheel replacement; commodity trailer accessory.×2
Bonnet sticker holder trim piece for Porsche-Diesel 165.×2
Weber air filter 1.5in height, 7in diameter element×4
Round turn signal, brake, and indicator light assembly×1
Engine oil filter for F3L and F4L 812 models — maintenance consumable.×1
Liqui Moly Pro-Line engine flush maintenance product×1
Exhaust pipe flap, flow control component×1
Mann OE engine filter — standard replacement consumable.×1
Engine support rubber mount W115; Mercedes mounting part.×2
Lamp lens with plate light, replacement glass×1
Exhaust valve for classic tractor engine.×10
Fuel tank cap, standard closure×1
Hardware mounting bracket left side, standard OE fitment piece.×1
Timing gear for Perkins A3.152 tractor engine.×10
Insulator-isolator assembly, electrical or thermal isolation×1
Turbo spray 400ml; standard aerosol product.×1
Maxol two-stroke engine oil 1L API-grade lubricant.×16
Oil and grease seal pair for rear axle, keeps contaminants out.×1
Dipstick, engine oil level gauge×1
CAT 2 lower link pin for three-point hitch implement attachment.×2
12-volt horn, electric sound signal×1
Alternator connector, electrical interface variant one×1
Brake light switch assembly, electrical control component×1
Thermo switch for motorcycle and non-VW applications.×1
Medium-strength threadlock adhesive 50ml; secures fasteners and prevents vibration loosening.×3
Cylinder head stud nut for classic tractor engine.×20
Grommet for thermometer, sealed dashboard fitting×1
Brake spring, standard mechanical component×1
Oil pressure switch, original equipment style×1
Bottom radiator hose for Massey Ferguson 35.×10
CAT 1 lower link pin for compact three-point hitch connection.×2
Linch pin with safety chain pair for hitch pin retention.×2
Red sealing ring for cylinder; engine seal component.×1
Spare lens glass, replacement component×1
Grommet for tachometer, dashboard mounting×1
Lamp lens without plate light, replacement glass×1
Indicator and position light lens, replacement glass×1
Exhaust flange gasket, combustion sealing×1
Hinge kit spring for MF 165/188 original equipment.×1
Warning lamp control, electrical component variant two×1
Generic cylinder O-ring; black engine seal component.×1
Upholstery cleaner foam 400ml aerosol for interior restoration.×4
Warning lamp control, electrical component variant one×1
Warning lamp control, electrical component variant three×1
Warning lamp control, electrical component variant four×1
Red oxide rust protection coating for metal surfaces.×4
Tire foam cleaner; low-cost consumable aerosol.×4
Cable coupler, standard mechanical connector×1
Silicon slide release spray lubricant aerosol.×5
Bumper spray paint black plastic; consumable aerosol.×3
Windscreen glass cleaner aerosol spray.×7
Tar remover aerosol for painted surfaces and trim.×7
Alternator connector, electrical interface variant two×1
Replacement axle pin for jockey wheel support and trailer coupling.×2
Gasket paper A4 sheet; material consumable for engine work.×8
Rubber starter boot sealing ring for engine block assembly.×1
Piston cylinder O-ring seal for engine rebuild.×1
Gasket for oil filler cap, prevents seepage×1
Multi-purpose chain and cable lubricant spray.×8
MOS2 rust dissolver and penetrant lubricant; loosens seized fasteners and protects metal surfaces.×6
Fuel filter glass element replacement only×1
Linch pin with chain — wheel hub locking fastener with safety attachment.×2
Diesel lid retaining spring for MF 165 small hardware.×5
Diesel lid retaining spring standard hardware replacement.×5
Stopper knob for quadrant lift control, mechanical adjustment component.×2
Spiral spring, standard mechanical component×1
Filter gasket seal — filtration system component.×1
Gunex specialty lubricant oil for precision mechanisms.×8
Nyloc nut 5/8 UNF, precision self-locking fastener.×1
Black cylinder sealing ring; consumable engine seal.×1
Final drive cover O-ring 170mm for differential housing seal.×177
Water pump plug — cooling system fastener component.×1
Rubber radiator mounting blocks, vibration isolation for engine bay.×4
Bonnet support pin, small part for hood stay attachment.×4
Castle nut 5/8 UNF fastener, hardware component for mechanical assembly.×16
U-bolt wire clamp fastener hardware.×25
Teflon lube 5gr packet, application aid for urethane bushing installation.×4
Front spoiler mounting nut for Golf.×5
Crankcase stud seal preventing oil seepage at fastener points.×80

Interior7 lines

356-style 8000 RPM tachometer for Porsche 356 and Beetle restorations.×1
356-style combination fuel and temperature gauge for classic VW and Porsche.×1
Carpet kit 9 pieces black without footrest for comprehensive coverage.×1
Black carpet kit, 7 pieces; mid-grade loop pile interior restoration for Beetle cabin.×1
1347 trunk carpet set, upper and lower black; comprehensive 2-piece interior coverage.×1
Black vinyl rear speaker shelf mounts speakers into Beetle interior×1
1343 armrest, black, left/right pair; interior trim for 1343 restoration projects.×1

Porsche Books Manual Spare Parts Catalogs18 lines

Porsche 911 GT3/GT3RS Spanish instruction manual, rare non-English owner documentation.×1
Porsche 996-01 Spanish instruction manual, original owner's guide language variant.×1
Porsche Classic series catalogue, factory reference with workshop and collector appeal.×1
Porsche 986 Boxster Spanish instruction manual, owner's guidance in Spanish language.×1
Porsche 911 GT2 factory hardcover book (April 2003 edition) for 996 collectors.×1
Originale 01 first issue Porsche Classic series, inaugural premium collector publication.×1
Originale 02 Porsche Classic publication, award-winning Red Dot 2017 collector magazine.×1
Porsche 997 Cabriolet convertible factory brochure, original Porsche literature.×1
Porsche Passion 911 996 factory brochure reference for model documentation.×1
Porsche 997 factory catalogue, classic 911 reference for collectors and restorers.×2
Porsche 2012 911 factory brochure, modern-era sales and specifications reference.×1
Porsche 997 factory book, Spanish edition, rare language variant for collectors.×1
Porsche 986 Boxster factory brochure, original dealer literature and specifications.×1
Porsche 996 factory sales brochure, original specs and colors technical documentation.×2
Porsche 996 factory catalogue, duplicate listing original dealer literature and specs.×1
Porsche Cayenne factory catalogue, original 955 brochure with specs and color options.×1
Porsche 924 928 944 parts catalogue reference resource.×2
Porsche exhaust heat exchanger system catalogue reference.×2

'- Hardware28 lines

Assorted imperial copper washers; bulk hardware consumable×2
Assorted metric locknuts; commodity fasteners with value dependent on quantity and specification range.×1
Assorted metric copper washers in various sizes; commodity fastener assortment.×2
Exhaust barrel nuts set of 8, manifold-to-header fastener.×1
T-bolt hose clamp 68–73mm heavy duty; largest common stainless hose fastener.×10
Heavy-duty T-bolt hose clamp 92–97mm; maximum-capacity steel clamp for large-diameter hose.×8
Heavy-duty T-bolt hose clamp 80–85mm; large-bore clamping solution for robust lines.×10
T-bolt hose clamp 36–39mm heavy duty; large diameter hose fastener stainless steel.×4
T-bolt hose clamp 52–55mm heavy duty; heavy-gauge hose clamp for large bore lines.×12
T-bolt hose clamp 56–59mm heavy duty; large stainless hose fastener premium duty.×10
T-bolt hose clamp heavy duty (unspecified size); stainless steel hose securing clamp.×11
Heavy-duty T-bolt hose clamp 44–47mm; adjustable steel fastening for hose routing.×8
T-bolt hose clamp 44–47mm heavy duty; mid-large hose securing clamp stainless.×8
T-bolt hose clamp 40–43mm heavy duty; substantial hose clamp for cooling and fuel.×1
T-bolt hose clamp 32–35mm heavy duty; stainless securing clamp for large bore hose.×5
T-bolt hose clamp 26–28mm heavy duty; stainless hose fastener mid-range size.×3
Stainless steel bumper bolt and nut set, eight pieces.×25
Heavy-duty hose clamp; commodity fastener hardware×4
Heavy-duty hose clamp; commodity fastener hardware×4
T-bolt hose clamp 23–25mm heavy duty; robust stainless securing clamp for hoses.×3
T-bolt hose clamp 17–19mm; stainless steel heavy-duty hose securing fastener.×4
Stay bolt/stud 10mm x 25mm, standard fastener.×10
10mm x 30mm stud fastener bolt×10
10mm x 20mm stay bolt stud fastener×10
M8 hex nut, bulk commodity fastener, excellent quality.×50
M6 hex nut, bulk commodity fastener, excellent quality.×50
Washer A 4.3 fastener component.×63
Plastic and rubber washer consumable hardware.×50

Professional Tools10 lines

Electric 220V AC winch/hoist; generic workshop equipment.×1
Air line extension reel with hose; workshop accessory.×1
Metric socket set 3/8 inch 9-19mm 12-point; garage tool set×1
German cylinder hone; workshop tool for engine bore finishing.×1
TORX bit socket set; competitive workshop tool for precision fasteners.×1
Deck height measuring tool; specialist engine-building equipment.×1
Tool box for trailer or tractor storage.×1
Crankshaft pulley puller tool; used condition, specialists only.×1
Replacement filter for protective mask.×2
Generic thermostat for standard engine cooling.×2

Brakes12 lines

Front brake disc 5x205mm; rotor for 5x205 disc brake conversion kits.×1
Dual-circuit master brake cylinder for disc brakes — disc conversion replacement part.×1
Brake fluid tank lower model 396 replacement for hydraulic systems.×1
Dual-circuit brake fluid tank with cap; alternative fitment variant.×1
Brake shoe set with linings 230x30mm front or rear fitment.×1
Brake shoe set with linings OE cross-reference fitment ready.×1
Brake fluid tank with cap reservoir assembly for hydraulic system.×1
Castle nut for rear brake drum — replacement fastener for brake assembly maintenance.×1
Rear brake shoe hardware kit spring and pin assembly set.×1
Rear brake quick kit fastener and spring hardware assortment.×1
Brake hose bracket stamped steel clip for secure line routing.×1
Dust cap protective cover for wheel bearings or bleeder valves.×1

Exterior4 lines

Heavy-duty car cover 480x170x146 cm — protective storage for classic vehicles year-round.×1
Cal-look window rubber kit, 4 pieces including front and rear seals.×1
Cal-look window rubber kit, 4 pieces including front and rear seals.×1
Felt channel door seal economy version provides weatherproofing at top and rear of door.×1

Tools6 lines

RAL paint color reference chart; match factory and custom automotive paint codes.×2
Stainless steel locking ties set, corrosion-resistant fastener.×1
Socket 36mm 1/2-inch drive; standard workshop tool for wheel and fastener work.×1
Modular parts storage box system; organize small fasteners and components.×5
Locking ties set, cable management and retention fastener.×1
Spark plug helicoil threaded insert for engine block repair.×12

Steering & Suspension6 lines

Universal joint shaft box-to-column steering safety component.×1
Tie rod adjustable left commodity steering part high-turnover.×1
Ball joint wishbone larger precision suspension component.×1
Ball joint upper 38.3mm suspension component standard replacement.×1
Rubber coupling steering elastomer precision isolation part.×1
Wheel bearing inner front market-standard retail quality.×1

Engine7 lines

Engine gasket set single or dual port covers all combustion chamber seal points.×1
Wide black crank pulley tin protects engine cosmetics with minimal bulk.×1
Push rod tube 172mm wear item for engine control assembly.×1
Woodruff key crank pulley 6x9mm secures pulley to crankshaft.×1
Flywheel shim 0.32mm precision spacer for bearing adjustment.×1
Flywheel shim 0.36mm precision shim for flywheel alignment.×1
Flywheel shim 0.30mm precision thickness for engine assembly tuning.×1

Other parts (mixed)22 lines

OEM front brake pad set for 993/965/928 GTS, 17.5mm.×1
Type 4 Bus and Porsche 914 engine rebuild kit×1
E-marked chrome reverse lamp road-legal lighting upgrade ready.×1
Ball stud kit for track rod end — steering system wear part.×4
Porsche brake pad set 17.5mm, front and rear applications.×1
Porsche Diesel tractor ignition key, original equipment×1
Euro-style bumper horn set, left and right chrome; cosmetic horn accessory upgrade.×1
Fuel tank decal sticker T180 part 16036, collectable identification label.×1
MAHLE oil filter Porsche 911 993, OEM-equivalent at catalogue.×2
Electric window switch, OEM-equivalent control component.×1
MAHLE OE oil filter Porsche 911 993 3.6 and 3.8 litre.×3
Air filter element Porsche 911 993 all models, OEM-equivalent.×2
OE-spec fuel filter for Porsche 944, direct replacement consumable.×5
Porsche Diesel rubber gasket for 7-pin trailer socket weatherproofing.×1
Wiper switch knob and insert interior trim consumable ready.×1
License plate light gasket replaces worn seals on rear lighting×1
Driveshaft suspension mount without bearing; Mercedes drivetrain part.×1
Air filter element Cayenne and Touareg, OEM-equivalent at catalogue.×5
Gearbox cover plate for speedometer housing fitment.×1
Stay bolt stud 10x65mm; OEM-spec fastener for assembly work.×11
Catalytic converter gasket; single exhaust emissions component replacement.×1
Split pin — commodity fastener for axle and pivot applications.×10

Make an offer on Parts, Literature & Hardware Mixed Lot

Retail valuation €33,723. We're inviting reasonable offers; all stock must go.

Make an offer